10 Best Cooker Extractor Fan Cover for 2025

Spares2go

• Washable Metal Grease Filter made for SPARES2GO to fit all makes of Cooker Hood / Kitchen Vent Extractors (Silver).
• Fits models: All makes and models of cooker hood / kitchen extractor vent with original filters measuring 32cm by 26cm. If unsure, please check the gallery image for specific measurements.
• Measurements: 32 cm x 26 cm ***Please Review exact measurements in gallery pictures before purchase as locating tabs and main measurements do vary between Filter Type***
• ***Please Note that this filter may arrive with blue protective strips to protect your filter from scratches during transit***

Neff

• Replacement Neff Vent Hood Cooker Extractor Lamp Cover Plates (Pack of 2)
• Fits Neff models: D1503B0/01, D1503S0/01, D1503W0/01, D5612X0GB/02, D5622X0GB/01, D5622X0GB/02, D5652X0GB/03, D5652X0GB/04, D5852X0GB/04, D8612N0GB/01, D8642N0GB/01, D8712N0GB/01, D8742N0GB/01, D8942N0GB/01, D9610A0/01, D9610A0/03, D9610A0GB/01, D9610A0GB/02, D9610N0/01, D9610N0/02, D9610N0GB/01, D9610N0GB/02, D96S2N0/01, D96S2N0/02, D96S2N0GB/01, D96S2N1/01, D97S2N0GB/01, D9910A0/01, D9910A0/03, D9910A0/04, D9910A0GB/01, D9910N0/01, D9910N0/02, D9910N0GB/01, D9910N0GB/02, D99S2N0/01, D99S2N0/02, D99S2N0GB/01, D99S2N1/01.
• Genuine Neff replacement lamp covers.

SUDS-ONLINE

• UNIVERSAL COOKER HOOD/EXTRACTOR GREASE FILTERS - PACK OF 2 SHEETS
• COOKER HOOD GREASE FILTERS - FLAME RETARDENT WITH GREASE SATURATION INDICATOR
• Specification Filter 57cm x 47cm for 60cm cooker hoods (Cut to size)
• EASY TO USE - Simply Remove The Mesh Cover & Filter Retainer From Your Cooker Hood - Dispose Of Old Filter - Cut The New Sheet To Required Size - Insert Striped Side Inside - Replace Filter Retainer & Mesh Cover
• exclusive to Suds-Online

CIARRA

• High Extraction Rate: 380m³/h. Our kitchen chimney hood is of a well great extracting rate. It can absorb grease, smoke and dust mostly, to protect your lovers, kids and yourself from unhealthy smells.
• Low Noise Level: 63DB(A). The extractor fan is of high quality. It produces less noise when it is working.
• Two Working Modes: can be used as a recirculating cooker hoods with two CBCF002 carbon filters (not included); Can also be a Ducting vent hood with a duct pipe coming with.
• Standard Duct Vent Chimney Hood: it is 60cm range hood. Please check it first before purchasing it.
• 12-month Warranty on Ventilation Range Hoods: please contact us when you need our tech support. Our professional tech and service team is standby.

Spares2go

• Light Diffuser / Plastic Lens Cover Plate Made for SPARES2GO To fit Cooker Extractor Hoods
• Fits Models: Please see dimensions and images for fitting compatibility with your vent extractor
• Dimensions: Length: 100mm -- Width: 52mm
• Premium quality cooker hood diffuser strip
• Pack of 2, Maximum 40 Watt Bulb

Kair

• White Plastic Ducting Air Inlet / Air Outlet with Gravity Shutters - 4 inch / 100mm round male spigot on the back of the grille for indoor or outdoor use.
• Non-return shutter flaps close automatically when not in use. Stops unpleasant odours, noises, or draughts flowing back through your duct. Gravity flap - no need for springs that could break.
• Easy to install, just push-fit duct and fittings together. Perfectly suited Bathroom or Kitchen extractor fan, Hydroponics fan, or In-Line Extract Fan.
• This grille can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive ventilation, positive input, air conditioning, HVAC, and Heat Recovery Systems.
• Suitable to use in compliance with Part F Building Regulations. Airflow performance independently tested by BSRIA or BRE. Free Air: 7200mm2. Static Pressure Drop in Pascals: 15 l/s = 10.94 Pa - 30 l/s = 18.59 Pa - 60 l/s = 24.21 Pa.

Qualtex

• Qualtex universal 2 pack of cooker extractor hood filters
• Fully flame retardant to comply with British standards
• Size 47cm x 57cm and can be cut to size
• Includes saturation indicator that changes colour to red from clear when it is time to change the filter
• Fits many of makes - Hotpoint - Beko _ Zanussi - Electrolux - Bosch - Neff - etc.

Spares2go

• Light Diffuser / Plastic Lens Cover Plate Made for SPARES2GO To fit Electrolux Cooker Extractor Hoods
• Fits Models: EFI60011S, EFI60012S, EFI60013S, EFI60021S, EFI6358G, EFI6408G
• Dimensions: Length: 145mm -- Width: 50mm
• Premium quality cooker hood diffuser strip
• Maximum 28 Watt Bulb

Spares2go

• 2 x Replacement Metal Mesh Grease Filter made for Spares2go to fit Leisure Cooker Hood Vents (Silver, 320 x 260mm)
• Fits Models: Select models of Leisure cooker hood with filters matching the measurements below. Please review the measurements in the gallery image to ensure a correct fit for your model.
• Measurements: Outer measurements: 320mm x 260mm - Distance between front release points: 45mm - Distance either side of front release points: 100mm - Release point length: 7mm - Distance between rear hinges: 123mm - Distance either side of rear hinges: 51mm - Rear hinge length: 17mm
• High quality, fully compatible replacement spare part.
• Quantity: Pack of 2

Bosch

• Genuine replacement lamp diffuser cover for your cooker hood.
• This can fit cooker hoods sold by different manufacturers and brands.
• For a full list of models this part / accessory is suitable for click on “See more product details” & then click “See all product details”.
• Please take appropriate safety precautions when repairing appliances.
• Repairs to gas appliances should only be made by a Gas Safe Registered engineer.