10 Best In-line Extractor Fan for 2025

Manrose

• Powerful in-duct mounted mixed flow extractor fan designed to produce higher working pressures for applications that require high air flows, with low relative noise. Can be mounted in a variety of applications and are suitable for use with either rigid or flexible ducting (100mm diameter)
• High quality ball bearing, long life motors, continuously rated and warranted for a minimum of 30,000 hours or 3 years. 3 speed settings selected via internal dip switch
• Performance (on maximum speed): Extract rate: 68 litres per second, 245 cubic metres per hour. Power consumption 25 watts. Sound output 25dB(A) @ 3m
• Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction. Fully Building Code compliant. BEAB approved. CE Approved
• Class II - double Insulation - no earth required. Built in run on timer (see important information at product description below regarding connection requirements)

Addvent

• High quality ball bearing, long life motor, continuously rated and warranted for a minimum of 30,000 hours or 3 years. High air flows are achieved through flexible duct
• Compact overall dimensions. 3 speed fan settings. Double Insulation - no earth required. Fully building code compliant
• Rated to IPX4. Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction
• Mains voltage 230/240V AC 50Hz. Three speed, selectable at installation. 22 / 23 / 25 watts power consumption. 50 / 68 litres per second, 180 / 216 / 245 cubic metres per hour extraction rate. Sound output 20 / 22 / 23 dB(A) @ 3 m. CE approved
• Dimensions: 300mm wide x 180mm wide x 235mm high (approx). 99mm diameter spigot. For connection to 100mm / 4 Inch diameter ducting

calimaero

• The in-line duct fan has a diameter of 100 mm and is easy to install and connect to pipes in the size of DN 100. Technical data: 100 m³/h fan power, 2550 rpm, 32 dB volume, IPX4 (protection against splashing water), +5 ° C to +40 ° C ambient temperature, 230 V voltage, 50 Hz frequency, 0.35 Kg
• For use in the ventilation of cellars, garages, penthouses, grow tents, for extractor hoods, kitchens, as bath ventilators, and wherever a fan is needed
• Connect with a power cable of 2 conductors (must be purchased separately). Uninterrupted use of the ventilator is possible. The fan can be controlled with any dimmer or speed controller.
• CONNECTION: The fan can be connected with a 2-wire cable. Eg 2x0.75mm². Since the housing, the fan, made of plastic, you need no earth (protective conductor). To connect the fan to the power supply, open up the motor housing, (see fotos) and then connect the wires to the outer terminal.
• CONTROL: The fan is then controlled either via an intermediate switch, switchable power strip, surface-mounted switch, speed controller, dimmer or other sensors (motion, humidity, temperature, etc.). A follower relay can be connected separately.

BLACK ORCHID

• Mounts directly to a 4" Hydroponic carbon filter.
• Can be used as air intake and mounted in hydroponic tent Pockets.
• Supplied with a 1.8m power cable and UK fitted plug.
• Moves up to 105 m3/hour of air and fitted with a quiet 14W motor.
• Suitable for connecting to the end of short duct runs up to 3 meters.

FANTRONIX

• High power extractor fan that fits standard 100 mm or 4 " solid or flexible ducting.
• Used for extracting air from toilets, bathrooms, hobby rooms, sheds & workshops.
• Up to 187 m3/hour extract airflow rate with a high pressure mixed flow impeller.
• Long life 240 v mains voltage 33 w motor. 36 dBA sound level at 3 m distance.
• Requires a live, switched live and neutral electrical connection. This is normally supplied from your household electrical lighting circuits.

• Air movement of up to 85 cubic metres/hour (23 litres/sec)
• Sound volume 41 dB(a) @ 3m (at fan motor), Mains 230V, 50Hz required to fan position
• Kit contents- 1 x Exterior grille
• Inline extractor fan with built in timer 1 x 3 metre length 100mm diameter PVC flexible ducting
• 1 x Interior Grille (circular design, different from picture) Securing ties

Manrose

• The SF range removes any risk of electric shock in wet areas as the fan is mounted remotely
• For use in: Toilet/bathroom
• Extraction 85m/hr

Manrose

• High Performance inline
• Choice of 2 speeds at installation
• Designed for longer ducting lengths

Fantronix

• High power extractor fan that fits standard 100 mm or 4 " solid or flexible ducting.
• Used for extracting air from toilets, bathrooms, hobby rooms, sheds & workshops.
• Up to 187 m3/hour extract airflow rate with a high pressure mixed flow impeller.
• Long life 240 v mains voltage 33 w motor. 36 dBA sound level at 3 m distance.
• Can be electrically wired directly to 240 v mains, variable speed or environment controller.

FANTRONIX

• High power extractor fan that fits standard 125 mm or 5 " solid or flexible ducting.
• Used for extracting air from toilets, bathrooms, hobby rooms, sheds & workshops.
• Up to 280 m3/hour extract airflow rate with a high pressure mixed flow impeller.
• Long life 240 v mains voltage 37 w motor. 37 dBA sound level at 3 m distance.
• Can be electrically wired directly to 240 v mains, variable speed or environment controller.