10 Best Ipx7 Extractor Fan for 2025

Air Vent

• 21 litres per second, 75 cubic metres per hour extraction rate
• 23 watts power consumption. Sound output 37.8dB(A)
• Timer adjustable 1 - 30 minutes. Single spring backdraught shutter. Fan is IPX7 rating, suitable for use in zone 1, 2 or 3
• 230/240V AC 50Hz wiring required to transformer position (3 core + earth). Suitable 2 core cable required between transformer and fan position
• Class II double insulated. CE approved.

Vent-Axia

• safety extra low voltage
• thermo-electric shutter
• basic model

Vent-Axia

• Unique extractor fan and light combination.
• Safety Extra Low Voltage (SELF) - suitable for shower areas. IPX7
• 20 watt 12 volt dichroic spot light bulb

Vent-Axia

• Unique fan and light combination
• Easy Installation
• Safety Extra Low Voltage (SELV) fan and lamp

Vent-Axia

• Recessed Extractor Fan & Light Unit
• Low Voltage - SELV (12v). Power consumption: 40 watts. IPX7
• Run on timer that continues to run the fan on for a pre-set time after the light is switched off.
• Extract Performance: 31 litres per second, 100 cubic metres per hour. Sound output: 35dB(A) @ 3m.

Vent-Axia

• The new Vent Axia Solo Pro is a new and improved version of the Vent Axia Solo model range. With improved aesthetics, sound and installation it has been specifically designed for effective ducted ventilation of internal bathrooms, toilets and other small rooms.
• Finished in White, the new Solo Pro range can be used with 100mm diameter smooth bore duct in straight runs equal to 50m, yet still meets the 15l/s required by the current Building Regulations Document F for ventilation of bathrooms. IPX4 Rated.
• 100mm high performance centrifugal extract fan for internal bathrooms, toilets and other small rooms Updated design Now even quieter at just 30dB(A) Extract performance 24l/s Single speed and overrun timer models Suitable for wall, ceiling, panel and window mounting SELV models suitable for installation over or within reach of a shower or bath
• Suitable for use with flat ducting IPX4 rated - IPX7 rated (SELV) Transformer complies with BS EN 60742
• Dimensions: Height: 250mm x Width: 590mm x Depth: 590mm

Vent-Axia

• Mains voltage 230/240V AC 50Hz to transformer position. Low voltage 12V AC from transformer to fan position (recommended 2.5mm flex)
• Extraction rate 22 litres per second, 80 cubic metres per hour. Power consumption 19 watts. Sound output 30dB(A) @ 3m
• Suitable for wall or ceiling installation. Can be used in zone 1. Back draught protection. Can be surface or semi-flush mounted
• IPX7. CE approved
• Dimensions: (Fan) 154mm wide x 154mm tall x 119mm deep (beyond installed surface). 100mm diameter spigot, for connection to 100mm diameter ducting. Spigot located bottom right as you look onto the front of the fan.

Vent-Axia

• built in humidity sensor
• safety extra low voltage
• thermo-electric shutter

Vent-Axia

• Suitable for shower enclosure and wet areas
• Fan and ligh combination
• Safety extra low voltage

Vent-Axia

• The new Vent Axia Solo Pro is a new and improved version of the Vent Axia Solo model range. With improved aesthetics, sound and installation it has been specifically designed for effective ducted ventilation of internal bathrooms, toilets and other small rooms.
• Finished in White, the new Solo Pro range can be used with 100mm diameter smooth bore duct in straight runs equal to 50m, yet still meets the 15l/s required by the current Building Regulations Document F for ventilation of bathrooms. IPX4 Rated.
• 100mm high performance centrifugal extract fan for internal bathrooms, toilets and other small rooms Updated design Now even quieter at just 30dB(A) Extract performance 24l/s Single speed and overrun timer models Suitable for wall, ceiling, panel and window mounting
• SELV models suitable for installation over or within reach of a shower or bath Suitable for use with flat ducting IPX4 rated - IPX7 rated (SELV) Transformer complies with BS EN 60742
• Dimensions: Height: 154mm x Width: 154mm x Depth: 144mm