10 Best Small Extractor Fan Bathroom for 2025

Envirovent

• Extract Rate: Impressive 26 litres per second, 96 cubic metres per hour. This is one of the highest extraction rates for any 4" axial fan.
• Sound output: 26.5 dB (A) @ 3 metres. This is one of the quietest fans in the market. Awarded Quiet Mark award 2013.
• Sound output: 26.5 dB (A) @ 3 metres. Power Consumption: 8 watts
• IP45 rated. Mains 230/240V AC. Please see Product Information section for important electrical connection requirements. CE approved.
• Dimensions: 158mm wide x 158mm high. Spigot is 99mm diameter (for connection to 100mm ducting) and projects for 80mm beyond installed surface.

Xpelair

• 4"/100mm traditional round grill style extractor fan with run-on timer
• Single speed setting and operated by a remote switch, usually a lighting circuit
• Timer; run-on time can be adjusted to suit installation conditions; from 30 seconds to 30 minutes
• Part F Building Rags compliant, IPX4 Rated, wall or ceiling mounted
• Finished in cool white corrosion free ABS plastic

Manrose

• In Line Extractor Fan. Designed to be connected to an inlet and outlet with flexible ducting (not supplied)
• Built in over-run timer continues to operate fan for pre-set time after light switch is turned off
• 100mm exhaust. Will perform up to 10m run. Built in single spring back draught shutter.
• Performance: 31 litres per second, 110m3 per hour. Noise level : 45dB(A) 20 Watt Power Consumption

Manrose

• Powerful in-duct mounted mixed flow extractor fan designed to produce higher working pressures for applications that require high air flows, with low relative noise. Can be mounted in a variety of applications and are suitable for use with either rigid or flexible ducting (100mm diameter)
• High quality ball bearing, long life motors, continuously rated and warranted for a minimum of 30,000 hours or 3 years. 3 speed settings selected via internal dip switch
• Performance (on maximum speed): Extract rate: 68 litres per second, 245 cubic metres per hour. Power consumption 25 watts. Sound output 25dB(A) @ 3m
• Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction. Fully Building Code compliant. BEAB approved. CE Approved
• Class II - double Insulation - no earth required. Built in run on timer (see important information at product description below regarding connection requirements)

Xpelair

• Sleek, smooth facia can be easily be wiped clean for So Simple maintenance
• The quietest intermittent bathroom fan on the market. They are ideal for bathrooms, shower rooms, cloakrooms and toilets. So Simple installation features enables the fan to be fitted easily in walls, ceilings and panels
• Twist and Click fascia for So Simple installation and maintenance
• Two speeds - 15 litres per second and 21 litres per second - selectable at install
• Suitable for wall, ceiling or panel fitting. 2 year manufacturers guarantee

Manrose

• standard model
• Wall mounted
• Ceiling mounted

Manrose

• standard model
• Wall mounted
• Ceiling mounted
• Spigot diameter is 6 inches

PLUMBING4HOME

• Size: 100mm (fan diameter);
• LOW NOISE - ONLY 26 dB(A);
• LOW POWER - ONLY 8 W RUNNING CURRENT;
• High flow rate: 93 m3/h; IPX2;
• Switching method: Standard (hard-wired to mains)

Manrose

• Quiet Operation at 27dB. Note: Product is tested in an anechoic chamber to a recognized standard.
• Timer over run, backdraught shutter
• Unique turning vane technology

Airflow

• Axial recessed fan meets current building regulations
• 100mm outlet, 9.2 watts, 68mhr/19 ls ; Wall/ceiling, surface/recessed mounting
• This is a basic fan that operates from a remote switch, you need to choose a plug in module for additional functionality
• This fan is idealy suited to a ensuite, cloakroom or small bathroom
• Silent open and closing delayed iris shutter, you can purchase additional coloured covers to match your decor. Ductable for short runs