10 Best Triple Monitor Stand 34 Inch for 2025

Duronic

• OPTIMISE WORK LIFE AND INCREASE EFFICIENCY: The Duronic DM653 is a heavy duty aluminium desk mount for two computer monitors or two lightweight LCD/LED television screens. Our DM65 range of gas-powered arms provide high flexibility along with an professional appearance. The arms can be manouvered higher or lower on the fly, just simply by holding the screen and directing it into the desired position.
• HEALTH BENEFITS AND INCREASED PRODUCTIVITY: Most stand-alone monitors are low-levelled and as such they can cause a problem for most people as they sit below the user’s natural line of sight. When a screen is not positioned properly it can have a negative effect on the user’s posture, wellbeing and productivity. This ergonomic Duronic desk mount allows the user to adjust the stand based on their own height and seating position, enabling them to work comfortably.
• ADJUSTABLE TO SUIT YOUR NEEDS: This model has one arm centrally on the pole, and two extended arms with two joints that swivel 180° and raise or lower the screen by 45°; these joints enable the user to manuouver the screen easier and bring the screen forwards towards the user. The VESA brackets that holds the screens offers further adjustability; thyey can swivel left/right, tilt up/down and can rotate 360° allowing you to view the monitor vertically.
• COMPATIBLE WITH VESA MONITORS: This DM653 monitor stand is suitable for most major brand monitors on the market (i.e. Samsung, LG, Dell, to name a few) who adhere to VESA compatibility. This mount will support one screen 15”-27” in size and with a maximum weight of 8kg per arm. The VESA bracket will hold a monitor with VESA 100 or VESA 75 mounting holes; this means that the holes should be either 100mm or 75mm apart from each other when measured.
• SOLID CONSTRUCTION, BUILT TO LAST: The DM653 is made from strong lightweight aluminium, this sturdy monitor arm will stand firm on your desktop supporting your monitor precisely and with ease. It can be fixed to the desk using the wide V-shaped desk clamp included, or it can be installed using a grommet (which you can buy separately: DM-GR-02). We sell a range of accessories for this pole to allow you to customise your set-up including spare arms and VESA brackets.

HUANUO

• ✅ UNIVERSAL DOUBLE MONITOR MOUNT - HUANUO vesa gas arm for dual 13 to 32 inches (diagonal between 33-81 cm) LED LCD monitors with VESA mounting pattern of 75x75 mm and 100x100 mm. This vesa mount is also suitable for diagonals that are smaller than the screen specified in the description. Just make sure that the VESA distance is within the support range and does not exceed the load weight of the monitor bracket
• ✅ FULL MOTION FOR ERGOMONIC HEIGHT - Our twin monitor arm is mounted on a 42 cm high column, so you can easily raise your monitor without tools with one hand from the desktop to a maximum of 64 cm, bring in horizontal direction up to a maximum of 53.3 cm (Vesa plate to the mounting base). If your desk is high enough, you can even use it standing up. It is also possible to stack two screens (≤27 inches)
• ✅ 2 MOUNTING OPTIONS - This monitor dual stand comes with a C clamp and also a grommet mounting kit. You can fix the screen mount and hold your two monitors by using the C clamp or if there is a hole (about 10mm) on your desk, you can choose the grommet mounting. The max thickness of the desk for C-clamp mounting is 7.87cm. The max thickness of the desk for grommet mounting is 7.5cm. The laptop arm stand frees up more space on your desk, keeping your workstation spacious and tidy
• ✅ HIGH QUALITY & LONG LIFETIME: Our monitor desk mount is made of aluminum + iron. The premium gas spring passed 20,000-circle adjustment motion tests, ensuring at least 5-year (if adjusting 10 times per day) trouble-free motion adjustments. Compared to other inexpensive monitor stands, our desk mount can be adjusted to any angle smoothly according to your needs without any jitter and noise
• ✅ EASY TO INSTALL - Includes all related accessories (comes with a 6-foot HDMI version 1.4 cable) and a German manual. ★ CAUTION ★: The gas spring is in low voltage under original condition. To maintain the weight of your 32 inch monitor (load capacity of each arm: 1-8KG), please set the gas spring tension knob to the correct tension. Our desk mount for monitor can not be used for desks made of PB, MDF or GLASS

PUTORSEN

• ✅ Heavy Duty Design: Premium high-quality aluminum dual monitor arm supports monitors up to 35", VESA compatible :75 x 75mm and 100 x 100mm.
• ✅ Arm Flexibility: Adjust up to 23.4" of arm extension and 23" of height. 45°/45° tilt up & down,-90°/+90° tilt left & right, -90°/+90° rotation.
• ✅ Weight Capacity: 2.2 - 33lbs (1kg - 15kg ) per arm. Heavy duty double C-clamp mount and grommet base installation.
• ✅ Tension adjusting system: With built-in gas spring arm to suit various monitor weight, freely move to any mounting point. Cable management system organizes wires for a tidy desk.
• ✅ Warranty: LIFETIME.

FLEXIMOUNTS

• 1. Fit for TV size:10"-27", VESA: 75x75mm, 100x100mm; Weight capacity: 1.5-5 kg(each monitor)
• 2. SPACIOUS CABLE MANAGEMENT CHANNELS-Allow wires to move freely while you adjust your screen position.
• 3. HASSLE FREE-C-clamp and grommet mount bases are included for easy and quick installation.
• 4. MULTIPLE CONFIGURATIONS-Give you the freedom to place your displays side-by-side, spread apart, back to back or anywhere in between. For viewing longer pages or blocks of code without scrolling, the arm also supports landscape to portrait display rotation for either monitor.
• 5.FULLY ADJUSTABLE-Height adjustment through the spring arms, swivel/articulate each arm connection, tilt and rotate at the monitor holder. The gas spring hovering system makes it incredibly easy to change monitor height with the touch of a finger.

HUANUO

• ✅ UNIVERSAL TWIN MONITOR STAND - HUANUO double monitor arm for dual 13 to 27 inches (diagonal between 33-68.5 cm) LED LCD monitors with VESA mounting pattern of 75x75 mm and 100x100 mm. This vesa mount is also suitable for diagonals that are smaller than the screen specified in the description. Just make sure that the VESA distance is within the support range and does not exceed the load weight of the monitor bracket
• ✅ MORE DESKSPACE FOR PRODUCTIVE WORK - The monitor desk mount is mounted to the edge of the desk via a C-clamp (max. Table thickness 6 cm). If there is a hole (approx. 10mm) in your desk, you can choose the sleeve assembly (max. Table thickness 6.5 cm) and keeps your monitors away from the desk without the feet on the desk, making your workstation more spacious and trouble-free
• ✅ FULL MOTION FOR ERGOMONIC HEIGHT - Our monitor dual stand is mounted on a 30 cm high column, so you can easily raise your monitor without tools with one hand from the desktop to a maximum of 54 cm, bring in horizontal direction up to 46 cm (Vesa plate to the mounting base). If your desk is high enough, you can even use it standing up. It is also possible to stack two screens (≤24 inches)
• ✅ HIGH QUALITY & LONG LIFETIME: Equipped with high-quality, polished die-cast aluminum solid steel and built with an ultra-precise gas spring that has passed 25,000 adjustment cycles, the gas spring damping rate is less than 5%, which can be infinitely adjusted to your needs without jitter and noise and ensures a trouble-free height adjustment of at least 6 years (with 10 settings per day)
• ✅ EASY TO INSTALL - Includes all related accessories and a manual. ★ CAUTION ★: The gas spring is in low voltage under original condition. To maintain the weight of your 27 inch monitor (load capacity of each arm: 1-8KG), please set the gas spring tension knob to the correct tension. Our laptop arm stand can not be used for desks made of PB, MDF or GLASS

PUTORSEN

• ✅ New premium high-quality aluminum dual monitor arm supports monitors up to 32", VESA compatible :75 x 75mm and 100 x 100mm.
• ✅ Arm Flexibility: Adjust up to 20.2"of arm extension and 24.4"of height. 90°/90°tilt up & down,-90°/+90° tilt left & right,360°rotation.
• ✅ Weight Capacity: 0 - 17.6lbs (0kg - 8kg ) per arm.Innovative C-clamp mount and grommet base installation.
• ✅ Tension adjusting system: With built-in mechanical spring arm to suit various monitor weight, freely move to any mounting point. Cable management system organizes wires for a tidy desk.
• ✅ Warranty: LIFETIME. For more information about the dual monitor arm(MSMT-022) from PUTORSEN, please visit Youtube: https://youtu.be/JWcH5PDabzU

BONTEC

• Strong steel single arm desk mount - the convenient way to free up the desk space. Holds one 13”-32” TV or monitor screen with a maximum load capacity of 10 kg.
• Fits all flat screen monitors and TVs with VESA sizes of 75x75 mm or 100x100 mm (Please ensure your screen is compatible with this mount’s MAX VESA by checking the manual or by measuring the distance between the 4 holes on the rear of the screen); VESA plate is quick fit and detachable for easy installation.
• Featuring +90°/-90° tilt, 180° swivel and 360° rotation for superb flexibility; Maximum arm extension length of 430 mm, height adjustable for optimum viewing angle; perfect for multitaskers, designers, programmers, etc.
• 2 ways of installations: 1) Desk clamp: heavy-duty ‘C’ clamp (fits desk thickness between 10mm and 100mm) offers supreme stability, keeping your screen fixed firmly and safely in place; 2) Grommet base install: fits desks with bolt-through hole (hole diameter supports min.10mm-max.80mm); the grommet base supports desk thickness from 10mm to 85mm.
• Concealed wiring design, keeping your desk tidy and clean; Storage slot for Allen keys. Comes complete with instructions plus all fixtures and fittings needed for simple installation.

VonHaus

• CAN HELP TO REDUCE EYE, NECK AND BACK STRAIN – placing your monitors in the optimum position has the potential to improve your posture and make you more comfortable whilst you work, allowing you to focus on the task at hand
• GAS SPRING TECHNOLOGY – each highly manoeuvrable arm is equipped with a 90° tilt and swivel range and can be mounted in a landscape or portrait position. The mount id made from high grade aluminium and uses innovative gas spring technology for effortless tool-free positioning anywhere within the arm’s range to a maximum extension of 525mm.
• EASY INSTALLATION & VESA COMPATIBILITY – each arm will fit a 13-32" screen with VESA dimensions of 75x75 or 100x100. Please check your monitor's compatibility before purchasing. Installation is simple thanks to the detachable VESA plate. Max. 7kg screen weight capacity (each arm)
• USB PORT & AUDIO PORT – conveniently supports data transfer and media charging, as well as headphone and microphone use. Integrated cable management ensures a clean finish
• MANUFACTURER 2 YEAR WARRANTY INCLUDED

Invision

• HEALTH BENEFITS & INCREASED PRODUCTIVITY – Positioning your computer monitor for maximum ergonomic comfort helps reduce the risk of posture related health issues whilst sitting for long hours at your desk. The Invision MX150 is the perfect solution, providing full height adjustment and has a wide range of viewing angles to suit your needs. Optimising your workstation and screen positon correctly can have a huge positive impact on your productivity, health and wellbeing
• ULTIMATE FLEXIBILITY & OPTIMUM VIEWING ANGLES – Our elevation assisted gas powered monitor arms are equipped with frictionless motion control making it easier to adjust and hold your screen at the perfect viewing angle every time. Capable of a full 360° of screen rotation for easy landscape to portrait viewing and can easily extend towards you to an impressive 525mm from its fixed position while comfortably holding screens up to a max weight of 6.5kg
• MAXIMISE DESK SPACE & OPTIMISE YOUR WORKLIFE - The MX150 allows you to completely transform your working environment by freeing up precious desk space. The + 35°/- 50° incline adjustment means you can tilt the screen forwards or backwards (great for a reading view or a standing break) and will remain completely stable at any angle. This is perfect for moving the screen around in any direction so you can quickly switch from work to gaming, movies or watching TV
• SOLID CONSTRUCTION & BUILT TO LAST – At Invision we pride ourselves on design and innovation. The MX150 is designed for strength and stability with a reinforced streamline die cast alloy frame and steel ring compression swivel fittings to ensure reliable positioning and zero sagging. All moving parts are tested to Invision`s 20,000 real life cycle motion test ensuring years of trouble free adjustment and all our PC monitor arms are backed with a full 3 year warranty
• EASY INSTALLATION & WORLD CLASS CUSTOMER SUPPORT - The MX150 is extremely versatile and installation is simple. It has two alternative installation methods to ensure the arm securely fixes to your desk. You can also combine two arms for a dual screen setup. The MX150 is for screens 17-27” and covered by our Compatibility Promise to ensure your screen is compatible and you have a trouble free installation. Should you need us our friendly customer support team are always on hand to help

suptek

• Compatibility - Single monitor mount ideal for most screens up to 27" and 10kgs with 75x75mm or 100x100mm backside mounting holes.
• Fully aticulation - Rotate 360°, tilt ±90° up and down, swivel ±90° left and right, extra tall height adjustment along the center pole.
• Two install options - C-clamp and optional grommet base (fits desk up to 10cm thickness) save your valuable desk space.
• Integrated cable management - Keeps your desk tidy and clean by organizing your power and AV cables in detachable cable clips.
• Easy installtion - Step-by-step user manual and organized hardware kit for hassle free mounting.